A newly developed solar terracotta air conditioner created in Cameroon is capable of dropping an indoor space’s temperature from 48 °C down to 25 °C, according to reporting published by Science et vie.
The innovation emerged as a graduation thesis project at the École polytechnique de Maroua in November 2024, earning its creator a grade of 18.5 out of 20, as stated by Science et vie. Operating without any compressor or refrigerant gas, the machine relies exclusively on clay, water, and a photovoltaic panel to drive an evaporative cooling process inspired by traditional Sahelian clay water jars.
Inside the unit, an argil reservoir stores water that is pumped upward to facade tubes via solar power, while a fan pushes ambient air through the wet surfaces to absorb heat.
Workshop testing showed the reservoir maintaining a temperature of 20 °C while ambient room temperature reached 36 °C, and outdoor trials under 48 °C successfully cooled a 30-square-meter space to 25 °C. In addition to climate control, the single solar panel powers an integrated lighting system and a USB charging port intended for mobile phones.
The designer estimates the manufacturing cost at 90,000 francs CFA—approximately 137 euros—though a final retail price has not yet been established. The system is targeted specifically at homes and health centers across the Sahel region, where solar potential is high and conventional electrical grids are unreliable.
However, geographic deployment is constrained by two major factors: the technology’s evaporative cooling efficiency drops in humid environments, restricting it to dry zones, and it consumes water in territories where that resource is often scarce.
Following its academic debut, the project advanced to the EDF Pulse Africa competition, where Diwa Innovation captured first place among 427 entries in March 2024, securing a 20,000-euro grant and support from HEC Paris. Because northern Cameroon currently lacks specialized laboratories to analyze clay composition or conduct advanced thermal testing, the competition funding and mentorship will be used to run independent evaluations before moving toward mass production.