More than ten GeForce owners reported melted or damaged power connectors in the first two weeks of November 2026, pushing hardware attention back toward Nvidia’s 16-pin power standard.
Connector Melting Affects RTX 5070
The latest reports cover two generations of graphics cards, spanning from the RTX 4090 to the new RTX 50 lineup. Shiftdelete reported on the VideoCardz roundup published November 14, drawing on data collected by the X account UNIKO’s Hardware from Reddit, Chinese forums, and other communities.
Among those incidents are two RTX 5070 cards rated at 250W. That power draw sits well below the 575W rating of the RTX 5090.
| Graphics Card | Rated Power | Reported Damage |
|---|---|---|
| RTX 5090 D | Not stated | Melted connector, damage on both cable and GPU socket |
| RTX 4090 (4 reports) | Not stated | Overheated cable, damaged Nvidia adapter, deformed connectors |
| RTX 5080 | Not stated | Damaged contacts on the power cable and socket |
| RTX 5070 Ti | 300W | Burned MSI adapter; separate case on a Thermaltake PSU-side connector |
| RTX 5070 (2 reports) | 250W | Melted adapters, one card refunded |
| Unspecified GeForce (3 reports) | Not stated | Deformed cable, damaged be quiet! PSU connector, damaged Gigabyte card socket |
In one RTX 5070 case, a Reddit user found a melted adapter after the PC suffered black screens and unexpected reboots. The acquaintance responsible for installing the hardware might have failed to insert the cable completely. A second owner reported a similar failure on an Asus Dual RTX 5070, prompting the retailer to refund the purchase when a replacement was unavailable.
the wireview pro ii caught this, awesome! gigabyte 5090 windforce, used for 5months asrock tempguard psu? wireview pro ii adapter used 16pin melted (the psu end) "just got around to considering cable monitoring. So I got a wireview pro 2 and it indicated pins 4 and 5 were not… pic.twitter.com/qh67EKMu46
Workstation Workloads Drive Heat Build-Up
A Reddit user posted about frayed braided sleeving on both 12V-2×6 cables powering two RTX PRO 6000 Blackwell Workstation GPUs, Tom’s Hardware reported on November 9.
“Did I just save my RTX PRO 6000 GPUs from melting?” posted u/Doomslayer606 on r/PcBuild, sharing photos of stiff, cracked, and easily peeling braided sleeving on the wires.

The workstation GPUs operated at a lowered power limit of 500W rather than their maximum 600W draw. Commenters said uneven current distribution across the pins caused localized heat buildup.
Third-Party Gear Protects Expensive Components from Damage
Users have turned to third-party monitoring gear and hardware shields to protect expensive components. A cable monitoring solution protects a graphics card after a user reported odd current behavior on a WireView Pro II monitor paired with an RTX 5090.
Board partners and accessory makers offer several retail alternatives to address the risk:
- WireView Pro II monitor priced at $190
- Cooler Master’s GPU Shield priced at $50
- Super Flower 12+4 pin OCP Dongle
- Corsair ThermalProtect 12V-2×6 cable
- Aqua Computing AMPINEL
MSI introduced yellow-tipped cables to indicate when the cable is fully connected, BGR reported.

Shortly after power-up in April 2025, a cable linked to a Seasonic Focus GX-750 power supply and a Zotac RTX 5070 melted. Investigators never established the root cause.
Within the Thermaltake Toughpower Grand enclosure, the damage occurred on the modular connector at the power supply side rather than on the 16-pin socket of the graphics card. What caused the workstation cables to fray despite the lowered 500W power limit?